DIY Plumbing Solutions to Save You Time and Money

If you’re like most homeowners, then you don’t enjoy paying a plumber to fix your plumbing. It’s expensive and it takes up time that you could be spending on other things. If this sounds like something that applies to you, then the following DIY plumbing solutions will help save both your money and time!

One of the best ways to save money on plumbing services is to do them yourself. If you have a little bit of knowledge and some basic tools, you can fix many common problems without spending a lot of money. In this blog post, we’ll provide the best DIY plumbing solutions that will help save you time and money.

At Home Plumbing Solutions – Get Your Emergency Plumbing Hat On

There’s nothing worse than having to deal with a blocked drain, blocked toilet, burst pipe or a broken gas fitting.  If you know what to look for, then these problems are easy enough to deal with. 

Blocked drains happen when there is a build-up of dirt, grease or food in the drainpipe. This can be caused by things like pouring cooking oil down the drain, not disposing of tissues properly or leaving hair in the shower trap.

If you have a blocked drain, there are a few things that you can do to try and clear them yourself:

If you have tried these methods but they haven’t worked, your next step is to use a plunger on the drain in question:

Battling Burst Pipes?

Burst pipes can be caused by a number of things, such as a frozen pipe, an over-flowing sink or dishwasher, or even tree roots growing into the pipes.

If you know that your pipes are susceptible to bursting, then there are a few plumbing solutions you can try the following: 

  • Keep your thermostat at a steady temperature to avoid pipes freezing.

 

  • Make sure that you know where the main water shut off valve is in case of a burst pipe.

 

If you do experience a burst pipe, here are some steps that you can take to try and minimise the damage:

  • Turn off the water by shutting off your main water supply.

 

  • Shut down all of the power in your home to avoid electrocution and fire hazards.

 

  • Remove everything from the area, as it will need to be dried out properly before you can repair or replace anything that has been damaged.
Not Working? Time to invest in affordable plumbing services.

If you’re looking for residential plumbing solutions or experiencing a plumbing emergency contact Sydney Blocked Drains for same day local plumbers.

plumbing solutions

Tackling Frozen Pipes

frozen pipes | Sydney Blocked Drains

If you can’t get to the pipe,  call a local plumbing service for help.

If a  pipe in your home freezes, it can cause a lot of damage as the water inside expands and causes the pipe to burst. There are a few things that you can do to prevent this from happening:

  • Keep all of your pipes warm by wrapping them in insulation or newspaper.
  • If you know that a particular pipe is at risk of freezing, then you can pour some hot water over it to help keep it warm.
  • Make sure that you have a working thermostat in your home so that the pipes can be kept at a steady temperature.

 

If you do experience a frozen pipe, here are some plumbing solutions that you can take:

  • Turn off the water by shutting off your main water supply.
  • Shut down all of the power in your home to avoid electrocution and fire hazards.
  • Use a hair dryer or heat gun to try and thaw the pipe out.

Leaking Pipes

Leaks are often caused by loose or corroded piping. If you have noticed that your pipes are leaking, then there are a few things that you can do to try and fix it yourself:

 

  • Tighten the bolts on any nearby valves.
  • Check for corrosion around the joints of any exposed pipes.
  • If you think that the leak is coming from an underground pipe, make sure to turn off your main water supply before attempting any repairs so as not to get electrocuted or flooded by a ruptured hose.

 

If these methods don’t seem to work, it might be time for professional plumbers to come to the rescue.

Leaking Pipe
hot water system
Your local plumber specialising entirely on blocked drains.

Hot water system not working?

If you are experiencing problems with your hot water system, there are a few things that you can do to try and troubleshoot the issue:

– Check to see if the pilot light is on. If it’s not, turn off the gas and relight it following the manufacturer’s instructions.

– Check all of your gas appliances to ensure they are off before turning your main water supply back on.

– If you have a power flushing hot water system, call up Sydney Blocked Drains for an affordable plumbing service if the problem persists.

If it’s still not working, here are some steps that you can take:

– Turn off the power to your hot water system at the fuse box.

– Check all of the wirings for any damage or corrosion.

– If there is no damage, turn on the power and see if it comes back on.

If it still doesn’t work, then you might need to call in a professional to take a look at it.

Gas Fitters

Local Sydney Plumbing Solutions | Sydney blocked drains

One of the most common plumbing services you might need is a gas fitting service. This will help to ensure that all of your appliances are running safely and efficiently:

  • Ensure that there aren’t any leaks in your appliance’s valves, as this can cause carbon monoxide poisoning if left unattended for too long.
  • If you are using an appliance that runs on natural gas, make sure that the room is well-ventilated to avoid any health hazards.
  • Have your appliances serviced at least once a year by a qualified gas fitter to ensure safe and proper operation.

 

Sydney Blocked Drains provides high quality plumbing services for all of your needs. Contact us today to schedule an appointment with one of our professional plumbers.

Sink not draining propertly?

If your sink is not draining correctly, there are a few things that you can do to try and fix this common plumbing problem:

– Check to see if the P-trap is clogged with dirt or hair. You can either clear it out yourself or call a plumber to do it for you.

– If the sink is still not draining, pour a bucket of hot water down the drain and see if that helps.

– Pour baking soda and vinegar down the drain to try and clear any clogs.

If these methods don’t seem to be working, then it might be best to take your plumbing hat off and get a professional plumber on the job.

Plumber fixing
toilet not flushing properly

Toilet not flushing properly?

If your toilet is not flushing correctly, there are a few things that you can do to try and fix the problem:

– Check to see if the tank is full. If it is, then empty it and try again. 

– Check the handle and see if it is sticking or damaged.

– If you have a dual flush toilet, make sure that the right button has been pressed for what you are trying to get rid of.

If these methods don’t seem to be working, then it might be time for a  plumber to come to the rescue.

If you are dealing with an emergency plumbing situation, don’t stress.  There are a few solutions that you can try before calling in local plumbers. Just make sure to stay safe and turn off all of the power in your home before attempting any repairs. And, always remember to call Sydney Blocked Drains for an affordable plumbing service when you need it the most!

Need emergency plumbing solutions? It happens to the best of us.

Whether you need a local plumber for commercial properties or emergency plumbing for a blocked toilet, you can reply on Sydney Blocked Drains plumbing solutions. We follow the highest level of industry standards, plus exceptional customer service, so you can rest assured that your plumbing emergency is in safe hands.

Just give us a call on 1300 070 943, and we’ll have a local plumber with you as soon as possible – 24 hours a day, seven days a week!

Leave a Reply

Your email address will not be published. Required fields are marked *