Sydney Plumbing: Is It Time For A Drain Upgrade?

Table of Contents

Common Drain Problems

Your drainage system is a critical yet often-neglected building component. When it comes to blocked sewer pipes or blocked pipes in general, a properly working drainage system may be the difference between a simple plumbing repair and a major overhaul.

Weather is a big factor when it comes to drainage system upgrades. Rapid changes in weather conditions often requires the installation of more secure and robust drainage systems. Heavy rains, for example, can overwhelm the system and cause blocked pipes. 

Proper maintenance of drains and drainage systems is important. Blocked drains can be prevented by keeping the drains and drainage system in good working order. Sydney Plumbers have been upgrading their drainage systems with high-quality products developed to withstand extreme weather conditions.

Weather-proof your drainage system by getting an upgrade. Sydney Plumbing has created a new sealing technology that creates an airlock seal around the drainage system which greatly increases its effectiveness by preventing blocked sewer pipes or blocked pipes due to bad weather. This is perfect for homeowners who are concerned about their existing drainage system’s ability to cope with bad weather.

Sydney Plumbing Experts | Sydney Blocked Drains

Sydney Plumbing 101: How Drainage Upgrade Works

Drainage is a key component of the plumbing system that should reduce the impact of flooding. Sydney Plumbing System has a complex network of underground pipes, surface channels, and other infrastructures to help reduce flash-flooding incidents that happen when portions of this infrastructure become blocked pipes. The plumbing system is designed to protect the property from water damage caused by rain, snowmelt, groundwater seepage, or surface runoff.

The drainage system consists of three main components:

  • Catchment Area

The catchment area takes care of collecting excess water from the roof, exterior surface, or other areas that are exposed to rainfall or snowmelt. This usually includes gutters and downspouts which direct the collected water into a gutter system, where it’s stored until it can be released through the inlets.

  • Inlets

The inlets take care of releasing the excess water when the flow exceeds capacity. Inlet openings direct the water to a drainage system where water can either be discharged through drainage system outlets or closed depending on the system design or structure.

  • Main Drain

The main drain is the large pipe that takes water collected by the inlets and transfers it to the subsurface drainage system such as storm drain and creek. This is where larger debris like sticks, leaves, broken branches, and the like are filtered out of the flow before they can obstruct the drainage pipes.

What is a Syphon Drainage System?

Sydney Plumbers often use a syphon drainage system to pump the water out of the trench. The syphon is made up of two parts: the downpipe and the up pipe. The downpipe sits in the trench and the up-pipe goes into the manhole. With this upgraded system, the water enters the downpipe through gravity which syphons it away to the manhole.

The sophisticated syphon drainage system makes it easier to upgrade Sydney Plumbing’s drainage network. And what does this mean? No more blocked pipes during heavy rainfall.

Surface Drainage Upgrade Options

There are several surface drainage upgrade options that Sydney Plumbing can offer, depending on the needs of the property. Some of the most common upgrade options include:

  • Ditched and Graded System

This system discharges water to either a nearby creek or gutter located outside the property. It is usually just found in rural areas as it uses natural waterways as a means to evacuate excess water from the property.  While this method is used more often than other systems due to its simplicity, it can have problems with clogging depending on the type of soil it is placed in. This system is best for properties that are located in areas with gentle slopes and soft soil.

  • Swales and Basins

This system collects rainwater and stormwater runoff. The water is then slowly released from the swale or basin over time which allows it to be absorbed into the ground. This system is beneficial as it helps to recharge groundwater and prevent soil erosion. This system can be found in suburbs where regulations prohibit the construction of storm sewers. It is also versatile, as it can be used in both rural and urban areas.

With the installation of a proper surface drainage upgrade, the Sydney Plumbing experts at Sydney Blocked Drains will be able to deliver a safer and more dependable drainage system for property owners across Sydney metropolitan areas.

What is the Best Sydney Plumbing Solution?

Every Sydney resident should have some form of surface drainage on their property. It’s especially important if you want to avoid having water damage and blocked drains caused by bad weather conditions.

Finding the right plumbing solution or drainage upgrade for your home or business shouldn’t be a problem. Choose from a wide range of plumbing solutions offered by Sydney Plumbers to ensure the longevity of your home’s drainage systems.

However, it may be advisable to be cautious of discounted offers from non-reputable Sydney Plumbing companies because they might not have been tested to Australian standards and will end up costing you more money in the long run.

There are a variety of surface drainage systems available, so finding the upgrade that you need should be easy. As much as possible, trust reputable Sydney Plumbing companies that follow Australian plumbing standards to avoid additional costs.

Trust the experts! Our licensed Sydney Plumbers are available 24/7 for your Emergency Plumbing Needs

Call us now +61 482 989 092 or email us at


More Posts

The Best Blocked Toilet Solutions

Blocked Toilet Solutions: For when the unexpected happens…. Table of Contents The Ultimate List of Blocked Toilet Solutions There are many toilet problems where expert

how to clear blocked drains | Sydney Blocked Drains

How to Clear Blocked Drains

How to Clear Blocked Drains If you notice that your sink takes a while to empty or if there’s an unpleasant smell coming from your

Blocked drain issues

4 Signs of a Blocked Drain

4 Signs of a Blocked Drain PLUS how to fix it A blocked drain can cause a lot of hassle and worry, especially if they

Send Us A Message

Sydney Plumbing FAQs

 If you’re experiencing blocked pipes, or your current drainage system can’t handle the amount of water during a storm, then it’s time for an upgrade. Sydney Plumbers can help you find the best solution for your needs.

This depends on the area you’re working with and your budget. Pipe systems are usually found in residential areas because they tend to be lower maintenance, but if the area is larger or there is a lot of water runoff than other products may work better for you.

You can check whether the Sydney Plumbing company you have decides to work with is accredited by the following organisations:

  • Plumbing Industry Commission
  • Master Plumbers Association
  • Australian Building Codes Board

If the company you’re thinking of getting a drainage solution from is not listed above, then it might be best to look for an alternative. 

This depends on the size and complexity of the job, but most installations can be completed within a day or two. Sydney Blocked Drains will be able to give you a more accurate estimate once they have inspected your property.

The cost can vary depending on the size and complexity of your drainage system, but it ranges between $3000 to $8000 for a medium-sized property.

Leave a Reply

Your email address will not be published. Required fields are marked *